ADVANCED LIGHTING.
ENGINEERED TO PERFORM.
Specialist LED technology for rail, infrastructure, industrial and demanding applications.
Designed, specified and validated for demanding environments where performance, compliance and reliability are non-negotiable.
A specialist lighting engineering company.
LUMAX Lighting is a specialist LED lighting engineering company developing advanced lighting systems for rail, infrastructure, industrial, marine and demanding applications. We design, specify and validate lighting across a broad specialist range — from high-efficiency retrofit tubes to rolling-stock, tunnel, hazardous-area, marine and bespoke technical products.
Our engineering spans optical, thermal and electrical disciplines, long-run voltage management and the compliance regimes that govern each sector — including ATEX, IECEx, EN45545-2, EN50155, EN60945 and the EN IEC 60079 series.
[Company history, production capability and certifications to be reviewed and supplied.]
Three engineering disciplines, one specialist range.
Engineered for the Extreme
Illumination engineered for harsh and hazardous environments where ingress, impact, fire and compliance define the specification.
- Tunnel lighting
- ATEX / hazardous areas
- Construction
- Marine
- Harsh environments
Engineered for Efficiency
High-efficacy LED systems engineered to reduce energy demand and extend asset life — powered by LUMAX® Technology.
- High-efficiency retrofit tubes
- Rolling-stock LED tubes
- Energy reduction
- Circular economy
- LUMAX® Technology
Engineered for Specialist Applications
Bespoke LED engineering for niche technical applications and emerging specialist lighting technologies.
- UV / water-treatment tubes
- Marine
- Bespoke technical products
- Future specialist ranges
We engineer lighting systems, not just supply them.
Every product is developed around the optical, thermal, electrical and compliance demands of its environment — then validated before it leaves engineering.
LUMAX® Technology
LUMAX Lighting's engineering platform — optical, thermal and electrical optimisation that maximises useful light output while reducing energy demand.
Optical Design
LED selection, secondary optics, beam shaping and photometric tuning for uniform, controlled distribution.
Thermal Management
Aluminium-backed PCB design, housing geometry and junction-temperature control for rated L70 lifetimes.
Electrical Engineering
Constant-current driver design, input-voltage tolerance, surge protection and power-factor correction.
Long-Run Voltage Management
Conductor sizing and driver architecture to maintain brightness and minimise voltage drop over extended runs.
IP & Environmental Protection
Ingress and impact-rated enclosures engineered for moisture, dust, vibration and mechanical abuse.
Rail Compliance
EN45545-2 fire, EN61373 vibration, EN50155 and EN50121-3-2 EMC for rolling stock applications.
ATEX / Hazardous Area Engineering
Intrinsically safe and Ex-protected designs certified to the EN IEC 60079 series for Zone 1/21 and 2/22.
Photometric Design
LM-79 photometry, IES files and lux-level modelling to validate performance against project requirements.
Custom Product Development
Bespoke lengths, voltages, mountings, connectors and emergency configurations built to specification.
Testing & Validation
Photometric, electrical, environmental and compliance testing to verify performance and certification.
Specialist products, engineered by application.
ATEX LED STRIP SERIES
ATEX and IECEx certified LED strip for Zone 1/21 & 2/22 hazardous area installations.
T8 RAIL LED TUBE LIGHTS
LED tube luminaire for new-build and retrofit rolling stock, meeting rail industry compliance standards including EN45545 and EN61373.
T5 RAIL LED TUBE LIGHTS
LED tube luminaire for new-build and retrofit rolling stock, meeting rail industry compliance standards including EN45545 and EN61373.
STANDARD LED STRIP SERIES
Temporary LED strip lighting system incorporating a high-density 180 LED/m configuration, delivering luminous outputs up to 1,200 lm/m with consistent photometric performance and uniform illumination.
T5 STANDARD LED TUBE LIGHTS
T5 LED tube delivering market-leading system efficacy of up to 220 lm/W with instant start, low-flicker operation and CRI ≥80.
T8 STANDARD LED TUBE LIGHTS
T8 LED tube delivering market-leading system efficacy of up to 220 lm/W with instant start, low-flicker operation and CRI ≥80.
MARINE T8 LED TUBE SERIES
T8 LED tube engineered for marine vessel lighting applications, certified to EN60945 for maritime environmental conditions including vibration, humidity and temperature extremes.
200M TUNNEL STRIP
Flexible LED strip luminaire engineered for industrial and infrastructure applications requiring continuous runs.
Maximum useful light.
Maximum efficiency.
LUMAX® Technology represents LUMAX Lighting's engineering approach to high-efficiency lighting — combining optical design, thermal management, component selection and electrical optimisation to maximise useful lumen output while reducing energy demand.
TECHNOLOGYOptical Efficiency
Secondary optics, beam control and photometric tuning direct useful light where it is needed, reducing wasted spill.
Thermal Management
Aluminium-backed PCBs and housing geometry control junction temperature, protecting lumen maintenance and service life.
Electrical Optimisation
Constant-current drivers, power-factor correction and surge protection deliver stable, efficient input-to-light conversion.
High-Efficiency LED Selection
Premium LED packages selected for luminous efficacy, colour consistency and lumen maintenance at the target operating point.
Long-Term Reliability
Component derating, thermal design and validated L70/L80 lifetimes support extended, low-maintenance service.
Energy Reduction
Higher useful lumens per watt lower energy demand and operating cost without compromising required illumination levels.
Proven across demanding installations.
Representative applications across rail, tunnel, construction, data-centre and hazardous-area projects. [Project photography to be supplied]
Rolling stock interior lighting
Flicker-free LED tube retrofits validated to EN45545-2 fire and EN61373 vibration requirements.
Temporary tunnel illumination
Continuous LED runs installed for construction and commissioning phases of metro and road tunnels.
Critical infrastructure aisles
Reliable, low-maintenance lighting for always-on facilities with restricted access windows.
Permanent rail tunnel lighting
Long-run LED systems specified for extended maintenance intervals and harsh ambient conditions.
Trusted across major infrastructure projects
Client references available on request. [Verified client logos to be supplied]
Engineering documentation behind every product.
Datasheets
Full product specifications, ratings and dimensions.
Photometric Files
IES files for lux modelling and lighting design.
Compliance Certificates
ATEX, IECEx, EN45545 and EMC documentation.
Technical Drawings
Dimensions, mounting and cross-section detail.
Installation Instructions
Wiring, connection and mounting guidance.
Product Specifications
Electrical, optical and environmental data.
Case Studies
Application notes from live installations.
When the catalogue isn't enough, we engineer to specification.
Where a standard product does not meet the project requirement, LUMAX Lighting can develop or configure specialist solutions around run length, voltage, lumen output, environmental protection, mounting, emergency operation and compliance requirements.
DISCUSS A PROJECT
